ScyllaDB Docs ScyllaDB Monitoring Deploying Scylla Monitoring Without Docker

Caution

You're viewing documentation for a previous version of ScyllaDB Monitoring. Switch to the latest stable version.

Deploying Scylla Monitoring Without Docker¶

The following instructions will help to deploy Scylla Monitoring Stack in cases where you can not use the recommended Docker version.

Please note, Scylla recommends you use the Docker version as it will provide you with most updated, current Scylla Monitoring system.

Minimal Production System Recommendations¶

CPU - at least 2 physical cores/ 4vCPUs
Memory - 15GB+ DRAM
Disk - persistent disk storage is proportional to the number of cores and Prometheus retention period (see the following section)
Network - 1GbE/10GbE preferred

Calculating Prometheus Minimal Disk Space requirement¶

Prometheus storage disk performance requirements: persistent block volume, for example an EC2 EBS volume

Prometheus storage disk volume requirement: proportional to the number of metrics it holds. The default retention period is 15 days, and the disk requirement is around 200MB per core, assuming the default scraping interval of 15s.

For example, when monitoring a 6 node Scylla cluster, each with 16 CPU cores, and using the default 15 days retention time, you will need minimal disk space of

6 * 16 * 200MB ~ 20GB

To account for unexpected events, like replacing or adding nodes, we recommend allocating at least x4-5 space, in this case, ~100GB. Prometheus Storage disk does not have to be as fast as Scylla disk, and EC2 EBS, for example, is fast enough and provides HA out of the box.

The main item to set an alert on is the available disk space in the monitoring system. Data is indefinitely accrued on the Prometheus data directory. The current monitoring solution does not churn data.

Install Scylla Monitor¶

The following procedure uses a CentOS 7 based instance

Download the latest Scylla Monitoring release.

wget https://github.com/scylladb/scylla-monitoring/archive/scylla-monitoring-3.5.tar.gz

Open the tar

tar -xvf scylla-monitoring-3.5.tar.gz

Install Alertmanager¶

Tested with alertmanager 0.20.0 version

Install alertmanager

wget https://github.com/prometheus/alertmanager/releases/download/v0.20.0/alertmanager-0.20.0.linux-amd64.tar.gz
tar -xvf alertmanager-0.20.0.linux-amd64.tar.gz

Copy the following file: rule_config.yml from scylla-monitoring-scylla-monitoring-3.5/prometheus directory to alertmanager.yml in the alertmanager installation directory.

For example:

cp -p /home/centos/scylla-monitoring-scylla-monitoring-3.5/prometheus/rule_config.yml /home/centos/alertmanager-0.20.0.linux-amd64/alertmanager.yml

Start the Alertmanager

For example:

cd alertmanager-0.20.0.linux-amd64
./alertmanager

Verify that Alertmanager is up and running, point your browser to the Alertmanager IP:Port

For example:

http://192.168.135.166:9093/

Install Prometheus¶

Tested with Prometheus version 2.18.1

Install Prometheus

wget https://github.com/prometheus/prometheus/releases/download/v2.18.1/prometheus-2.18.1.linux-amd64.tar.gz
tar -xvf prometheus-2.18.1.linux-amd64.tar.gz

Copy the following files: scylla_servers.yml, prometheus.rules.yml from scylla-monitoring-scylla-monitoring-3.5/prometheus directory to Prometheus installation directory.

Copy prometheus/prometheus.yml.template to prometheus.yml

For example:

cp scylla-monitoring-scylla-monitoring-3.5/prometheus/*.yml prometheus-2.18.1.linux-amd64
cp scylla-monitoring-scylla-monitoring-3.5/prometheus/prometheus.yml.template prometheus-2.18.1.linux-amd64/prometheus.yml

Edit the prometheus.yml file to point to the correct static data sources.

Note

Make sure to include the honor_labels: false parameter in the prometheus.yml file.

vi prometheus-2.18.1.linux-amd64/prometheus.yml

Set the alertmanger address and port by replacing AM_ADDRESS in the file.

For example if the alertmanager will run on the same host:

alerting:
   alertmanagers:
   - static_configs:
       - targets:
           - 127.0.0.1:9093

Replace the files in to point to the right local file, typically for scylla, node_exporter and manager_agent you can use the same file (scylla_servers.yml).

For example the scrape config for Scylla:

global:
  scrape_interval: 5s # By default, scrape targets every 5 second.
  scrape_timeout: 4s # Timeout before trying to scape a target again

  # Attach these labels to any time series or alerts when communicating with
  # external systems (federation, remote storage, Alertmanager).
  external_labels:
    monitor: 'scylla-monitor'

scrape_configs:
- job_name: scylla
  honor_labels: false
  file_sd_configs:
    - files:
      - scylla_servers.yml
  relabel_configs:
    - source_labels: [__address__]
      regex:  '([^:]+)'
      target_label: __address__
      replacement: '${1}:9180'

    - source_labels: [__address__]
      regex:  '(.*):.+'
      target_label: instance
      replacement: '${1}'

Create and set scylla_servers.yml file point to your Scylla nodes and scylla_manager_server.yml file to point to your Scylla Manager.

Note

There is no need to configure node_exporter_server. Instead, in the Prometheus scrape config of the node_exporter you can use the same file you used for Scylla and Prometheus will assume you have a node_exporter running on each Scylla server.

An example for those files can be found under the Prometheus directory: prometheus/scylla_servers.example.yml and prometheus/scylla_manager_servers.example.yml

Note

You must have both files even if you are not using Scylla Manager

Add the labels for the cluster and data-center

scylla_servers.yml:

For example:

cat scylla_servers.yml
# List Scylla end points

- targets:
  - 192.168.66.6
  - 192.168.66.244
  labels:
    cluster: cluster1
    dc: dc1
- targets:
    - 172.17.0.3
  labels:
    cluster: cluster1
    dc: dc2

Note

See the previous note about deprecating the node_exporter_servers.yml file.

scylla_manager_server.yml

For example:

- targets:
  - 127.0.0.1:56090

Create a data directory for Prometheus to store the metrics data

For example:

mkdir prometheus-2.18.1.linux-amd64/mydata

Start Prometheus server:

For example:

cd prometheus-2.18.1.linux-amd64
./prometheus --config.file=prometheus.yml --storage.tsdb.path mydata

Data should start accumulate on: ./mydata

Verify that Prometheus is up and running, point your browser to the Prometheus IP:Port

For example:

http://192.168.135.166:9090/

Prometheus console should be visible

Verify that the node_exporter and scylla metrics accumulating in the server by executing a query through the console

For example:

node_memory_MemFree

And

scylla_reactor_utilization

At this point Scylla is emitting the metrics and Prometheus is able to store them.

Install Grafana¶

Tested with Grafna 6.7.3

Install Grafana based on the instructions here make sure to use version 6.7.0 or higher

Depends if you installed Grafana from a repository (yum install), or if you downloaded the zip version, the directory structure will be different in the rest of the steps.

Access Scylla-Grafana-monitoring directory

cd scylla-monitoring-scylla-monitoring-3.5/

Copy the plugins to the grafana plugins directory (by default /var/lib/grafana/)

sudo cp -r grafana/plugins /var/lib/grafana/

If you installed Grafana from packages, instead of /var/lib/grafana/ you should copy it to public/app inside the directory you opened Grafana in.

For example:

cp -r grafana/plugins ../grafana-6.7.3/public/app

Provision the Dashboard them

For example Scylla version 4.0 and Scylla manager version 2.0

For Grafana installed with yum install

sudo cp grafana/load.yaml /etc/grafana/provisioning/dashboards/
sudo mkdir -p /var/lib/grafana/dashboards
sudo cp -r grafana/build/* /var/lib/grafana/dashboards

For Grafana installed from packages

cp -p -r grafana/build/* ../grafana-6.7.3/public/build/
cp -p grafana/load.yaml ../grafana-6.7.3/conf/provisioning/dashboards/load.4.0.yaml
cp -p grafana/load.yaml ../grafana-6.7.3/conf/provisioning/dashboards/load.manager_2.0.yaml

Edit the load.* files in /home/centos/grafana-6.7.3/conf/provisioning/dashboards/ for the correct path, for example load.4.0.yaml would point to: /home/centos/grafana-6.7.3/public/build/ver_4.0 and the FOLDER will be 4.0

Set the data source by copy datasource.yml and edit it

sudo cp grafana/datasource.yml /etc/grafana/provisioning/datasources/

For Grafana installed from packages

cp -p grafana/datasource.yml /home/centos/grafana-6.7.3/conf/provisioning/datasources/

You should set the Prometheus and the alertmanager IP and port.

For example

sudo cat /etc/grafana/provisioning/datasources/datasource.yml
apiVersion: 1
datasources:
 - name: prometheus
   type: prometheus
   url: http://192.168.135.167:9090
   access: proxy
   basicAuth: false

 - name: alertmanager
   type: camptocamp-prometheus-alertmanager-datasource
   orgId: 1
   typeLogoUrl: public/img/icn-datasource.svg
   access: proxy
   url: http://192.168.135.166:9093
   password:
   user:
   database:
   basicAuth:
   isDefault:
   jsonData:
     severity_critical: '4'
     severity_high: '3'
     severity_warning: '2'
     severity_info: '1'

Start the Grafana service

For Grafana installed with yum install

sudo service grafana-server start

For Grafana installed from packages:

cp -p /home/centos/grafana-6.7.3/conf/sample.ini /home/centos/grafana-6.7.3/conf/scylla.ini

Edit scylla.ini to reflect the right paths in the paths section of the file.

plugins = /home/centos/grafana-6.7.3/data/plugins
provisioning = /home/centos/grafana-6.7.3/conf/provisioning

Start the server:

cd /home/centos/grafana-6.7.3/
./bin/grafana-server -config /home/centos/grafana-6.7.3/conf/scylla.ini

Make sure Grafana is running

Point your browser to the Grafana server port 3000, the assumption is that Grafana and Prometheus are collocated on the same server.

Was this page helpful?